StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Effects of Urbanization on the Hydrology - Essay Example

Cite this document
Summary
This essay "Effects of Urbanization on the Hydrology" focuses on the general effect which has become evident due to urbanization is a reduction in the infiltration of water into the ground. Reduced infiltration is vital in groundwater recharge and increases the speed of runoff…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER91.7% of users find it useful
Effects of Urbanization on the Hydrology
Read Text Preview

Extract of sample "Effects of Urbanization on the Hydrology"

Hydraulics Hydraulics Q1 a) Effects of urbanization on the hydrology of catchment and SuDS mitigation The general effectwhich has become evident due to urbanization is reduction in the infiltration of water into the ground. Reduced infiltration is vital in groundwater recharge and increase in the speed of runoff above normal conditions (JEFFERIES, 2011 p 102-134). Urban areas have most of the surfaces covered with concrete or tarmac ways. The covered surfaces contribute significantly to the hydrological cycle characteristics of the urbanized catchment areas. Consequently lead to the deterioration of water quality at the water sources and catchment areas being prone to flooding. Most of the ancient towns and cities in United Kingdom are close to the river always experiencing damages from flooding over time. SuDS are small scale source control measures which are useful in draining surface water in a more natural way through infiltration, retention and storage devices in urban areas. They employ methods that mimic natural drainage systems by passively removing contaminants in surface water and naturalizing flow rate (JEFFERIES, 2011 p 189-221). After reducing the water volumes and pollutants near the water source, a corresponding reduction in the rate of flow downstream and flood discharges are evident. Reducing rate of downstream flow and flood discharges contribute in improving the quality of water. Further improvements are realizable due to reduced storm water into sewers because little surface water spills over into the sewer system, this spillage if often allowed force raw sewer discharge into the water courses. Certain infiltration based systems such as permeable pavements, swale and detention ponds are always important in controlling the effect of storm water in built-up areas. Permeable pavements are alternative grounds that allow storm water to filter through the voids into the underlying stone reservoirs for temporarily storage (KING, & WISLER, 2008 p 117-131). Permeable pavements consist of permeable surface layer, bedding a layer, underlying stone aggregate reservoir and a filtration layer laid at the bottom. Swales are shallow channels for collecting, and removing pollutants from water (KING, & WISLER, 2008 p 207-231). Swales have shallow side slopes and a flat bottom. They usually have grass covers and mostly water flows in a thin layer through the grass. Detention ponds are for improving the quality of urban runoff and reducing the rates at which the peak storm flows this is possible by providing temporary storage during large storms. b) Peak Flow T(N) TUH(m^3/s) 25mm 33mm 6mm storm(m^3/s) 0 0 ---- ---- 0 1 3 7.5 0 ---- 7.5 2 13 32.5 9.9 0 42.4 3 21 52.5 42.9 1.8 97.2 4 19 47.5 69.3 7.8 124.6 5 9 22.5 62.7 12.6 97.8 6 2 5 29.7 11.4 46.1 7 1 2.5 6.6 5.4 14.5 8 0 0 3.3 1.2 4.5 0 0.6 0.6 0 0 Q2 a) Differences between Slow Sand Filters and Rapid Gravity Filters Design Slow sand Filters have a filtration rate of 0.15 m3/m2•h, the area per filter bed is less than 200m2, and an effective grain size of 0.15m to 0.35mm. Slow sand filters system consist of two filter beds and the depth of each filter bed is at most 1m. Supernatant water depth in rapid sand filters range between 0.7m to1m (MAYS, 2011 p 139-142). Rapid sand filters have a filtration rate of between 5 and 15 m3/m2.h. The effective grain size is ranging between 0.4m to 1.2 mm. Depth of filter material has allowance between 1.5m to 2m. Supernatant water depth for rapid sand filters is 0.6-2.0m. The slow sand filters are larger in size almost 2000 m2 while the rapid sand filters are comparatively just about 100 m2 Figure1: Diagram showing a typical rapid sand filter system Figure 2: diagram showing slow sand filters system Operation Slow sand Filters maintenance cleaning is always when the fine sand clog. The cleaning is by scraping off the top layer of the filter bed. Routine clog clearing is either after some weeks or one-year period (MAYS, 2011 p 140-152). In this slow sand filter cleaning technique, the technician can eliminate a film of filtering fabric occasionally, this help in reducing frequent replacement of the upper layer. Rapid Sand Filters consists of regular back washing and cleaning between 24 to72 hours. Cleaning process usually requires an interruption of the purification process for a period of 5 to10 minutes per filter bed to achieve this successfully there should be a number of parallel filter units to ensure constant water supply. The maintenance team must ensure careful back washing process to guarantee that the rate of flow is under control to avoid the filter medium erosion. Experts must be available to operate the rapid sand filters while in slow sand filters experts must not be available Treatment For Slow sand filters after treatment, the turbidity level should be less than 1.0 NTU while Rapid sand filters turbidity level being 5.0 NTU. Slow sand filters use is in regions with large areas of land are available since they occupy vast areas of land (MAYS, 2011 p 130-156). Rapid sand Filters are usually useful in the treatment of large quantities of water when the area available for the water treatment plant is limited. Pretreatment by coagulation is necessary for the rapid sand filters but not in slow sand filters. The slow sand filters remove almost 99 percent of bacteria compared to around 90 percent in rapid. Q2 b) Impacts of Raw Sewage into Rivers Organic matter present in sewage uses up the dissolved oxygen in the river during decomposition depleting oxygen which is useful for the survival of aquatic life. Raw sewage has the effect of raising the turbidity level of the water, increasing the amount of suspended particles that reduce the intensity of light present for plant growth (MAYS, 2011 p 120-146). The suspended particles may also choke the fish gills. Raw sewage releases warmer or cooler water into the receiving water body which alter the normal temperature ranges within which the aquatic life survive favorably. The unfavorable temperatures affect the survival of eggs, larvae fish and ecosystem productivity. Raw sewage also introduces pesticides, chemicals and heavy metals into receiving water that find their way into animal tissues and have long term effects on them. The three stage conventional treatment helps in ensuring that human and industrial wastes are disposed off to water bodies in the required standard. It consists of a combination of physical, chemical and biological processes (MAYS, 2011 p 98-115). The three stages in conventional treatment include primary; secondary and tertiary processes. Primary process is mainly to remove suspended particles which mainly occur in at the screen and the grit chamber. Secondary process is useful in removing dissolved and suspended biological matter. Tertiary process is the final treatment stage that improves the effluent quality further before discharge to receiving waters by removing residual suspended matter and toxins. Q3 a) calculate the pressure at the hinge Pressure at hinge= 1x 9.81x 7.2= 70.632 =70.632KN/m2 b) Force on the gate Area= 0.65 x 0.45= 0.2925m2 Location of CG (y) = 7.2+ 0.68Sin 15/2 = 7.288m F= 9810x 0.2925x 7.288= 20912.36N =20.912kN c) Location of the Point of Action yp IG= 0.65x0.453 = 4.935m4 12 yp= 7.288+ 4.935sin215 = 7.44m 0.2925x7.288 yp= 7.44m Q4 a) Volume of water displaced by pontoon Volume of water displaced = volume of the pontoon 18m x 11m x 5.5m= 1089m3 b) Depth of immersion Weight of pontoon= weight of water displaced 7553kN= 9.81x18x11xd Depth of immersion= 3.89m c) The distance BM BM= I/V 18X113/12 = 2.59m 18X11X3.89 d) The value of GM Position of center of buoyancy= 3.89/2= 1.95m Position of C.O.G= 5.5/2= 2.75m BG= 2.75-1.95= 0.8m GM= MB-BG= 2.59-0.8=1.79m e) Pontoon stability Yes Bibliography JEFFERIES, C. (2011). The SWITCH Transition Manual: Managing Water for the City of the Future. Dundee, University of Abertay Press KING, H. W., & WISLER, C. O. (2008). Hydraulics. Charleston, SC, BiblioBazaar. MAYS, L. W. (2011). Water Resources Engineering. Hoboken, NJ, John Wiley. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Hydraulics Essay Example | Topics and Well Written Essays - 1000 words”, n.d.)
Hydraulics Essay Example | Topics and Well Written Essays - 1000 words. Retrieved from https://studentshare.org/engineering-and-construction/1665544-hydraulics
(Hydraulics Essay Example | Topics and Well Written Essays - 1000 Words)
Hydraulics Essay Example | Topics and Well Written Essays - 1000 Words. https://studentshare.org/engineering-and-construction/1665544-hydraulics.
“Hydraulics Essay Example | Topics and Well Written Essays - 1000 Words”, n.d. https://studentshare.org/engineering-and-construction/1665544-hydraulics.
  • Cited: 0 times

CHECK THESE SAMPLES OF Effects of Urbanization on the Hydrology

Watersheds

The effects of silviculture and agriculture have always been outlined basing on watersheds.... A watershed is a basin-like landform defined by highpoints and ridgelines that descend into lower elevations and stream valleys.... A watershed carries water "shed" from the land after rain falls and snow melts....
8 Pages (2000 words) Research Paper

Climatology and Pollution of Watersheds

The effects of silvicultural and agriculture have been based on watersheds.... Mississippi watershed is found along Mississippi river which flows in the United States of America and the river emerges from western part of Minnesota and it flows towards the south at 4,070 km towards the delta of the Mississippi river....
7 Pages (1750 words) Essay

Storm Drainage Design

Through evapotranspiration, the effect of the stream-aquifer interaction, effects of other hydrologic processes such as interception, and depression storage are altogether ignored for analysis (Ramírez, 2000), other parameters should be appropriately measured for relevant hydrological analysis.... Appropriate topographical data for watercourse such as information on structures, water drainage routes, potential blockages/obstructions to drainage is necessary for considering the effects of various factors on river flow....
6 Pages (1500 words) Coursework

Natural Environment and the Urban Centres

These signs are the effects of urban sprawl.... This essay discuss the thesis that natural environment imposes limitations on the growth and sustainability of urban centres with a reference to a particular case study.... The case will examine the development of Sao Paulo as one of the largest 'urban agglomeration' in Brazil....
6 Pages (1500 words) Essay

The Role of Urbanization Development of Acid Rain and Its Effects on the Environment

Over the years, Man has been warned about the effects of pollution and its effects on the environment.... The following term paper focuses on the formation of acid rain and its environmental effects in North America and Europe.... Acid rain has many ecological, physiological and adverse economic effects....
6 Pages (1500 words) Term Paper

Negative Effects of Human Activities on Hydrology and River Ecosystems

The paper "Negative effects of Human Activities on Hydrology and River Ecosystems" presents a detailed explanation of the effects of human activities on the hydrological cycle and river ecosystems.... A detailed description of the impacts of human activities on water ecosystems and hydrology is given with emphasis on the negative effects of changes created by human activities.... A literature review is conducted to synthesize information on human activity threats and their impacts on hydrology and river ecosystems....
16 Pages (4000 words) Term Paper

Flood Mathematical Models That Are Used In Flood Modelling

"Flood Mathematical Models That Are Used In Flood Modelling" paper argues that the use of hydrographs and the data provided on the Nash model provided information that is easy to extrapolated flood plain on base flow.... Other models have explored as future possible models for flood modeling.... ...
16 Pages (4000 words) Statistics Project

The Concept of Landfilling Processes

However, with the increased urbanization and increase in population growth as well as industrialization, massive changes have occurred in landfilling.... Several provisions have been established in different countries, and internationally that enhance the safe disposal of wastes with the aim of reducing their adverse effects on the environment....
12 Pages (3000 words) Term Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us