StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Implementation of Ergonomics for Small Business - Term Paper Example

Cite this document
Summary
The paper “Implementation of Ergonomics for Small Business” evaluates the activity of Safety and Health Administration, which estimate that corporations with twenty or fewer staff three of their staff suffer from MSDs (Muscular-skeletal disorders) annually…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.1% of users find it useful
Implementation of Ergonomics for Small Business
Read Text Preview

Extract of sample "Implementation of Ergonomics for Small Business"

 Implementation of Ergonomics for Small Business Implementation of an Ergonomics program for a Small Business The activity Safety and Health Administration estimate that corporations with twenty or fewer staff three of their staff suffer from MSDs (Muscular-skeletal disorders) annually. Among all corporations, in line with office, the value of such injuries, as well as productivity losses and worker's compensation claims totals to $45 billion on an annual basis. Currently, the agency has decided it has to save many businesses from themselves. New federal ergonomic rules states that management should defend employees and answer to their complaints. The rules, sanctioned in record time, are among the foremost disputed rules of any kind introduced in years (Andrew& Kin, 2006). Small businesses are most (likely) hurt the worst by such injuries: they are as likely to occur in little offices as massive ones; however, smaller corporations are less ready to incur the cost of health care, temporary replacement of employees, workers' compensation, and worker grooming (not to say lost business). At an equivalent time, these businesses also are less equipped to implement OSHA's needed policies. Ergonomics is defined as the science of fitting tools and jobs to employees and of preventing injuries caused by repetitive motion, awkward posture, force, or vibration. As Occupational Safety and Health Administration developed its laws, business interests were against safety considerations during a discussion over what specifically this suggests. Corporations claimed the foundations might cripple small businesses, and questioned however, precise such policies may well be given the individuality of each job and employee. They additionally argued that corporations should not be answerable to the manner workers prefer to twist their bodies (Van Do, 2005). On assembly lines and alternative industrial plant floor jobs, repetitive motions usually cause the matter and therefore, the worker is positioning concerning machinery. Occupational Safety and Health Administration has historically regulated labor closely and left workplace employees alone. With the new rules, that too has modified. Injuries suffered by workplace employees differ from those of manual workers. Some of the problems associated with a workplace setting include inflammation, carpal tunnel syndrome, sore neck, back, and sprained shoulders as in the case of employers. For small businesses, the costs are available in two forms: lost productivity and raised bills. Per Occupational Safety and Health Administration, MSDs cause thirty four percent of illness-related lost workdays in businesses. Every year, they cost corporations 15 - 20 billion dollars in worker's compensation. Analysis of workspace When analysis space, desktop accessories for instance telephone, stapler should be accessed to check whether they are easily reachable and arranged according to frequency of use. Risk Factors involved when there is not enough space include awkward postures fatigue and risk of injury that occur while stretching arms to reach accessories that are at far end. If the employee is right-handed, accessories should be organized (except telephone) to the right hand side of a computer. Telephone should be located on the left to answer with the hand and take notes with the right hand and vice versa if someone is left-handed. Verify that accessories are used most frequently and find them nearest to you (Stephen, 2011). There should be adequate space for proper placement of monitor, keyboard, and input device. Poor placement of apparatus causes twisting and awkward postures while using it. It can also cause Neck, shoulder, back elbow wrist and hand problems. To solve this, keyboard receptacle should be installed to permit correct placement of keyboard, monitor, and input device. Place central processing unit on the floor in vertical stand to liberate area on the desktop. Installation of free-floating monitor stands help in bringing the monitor off the desktop. Another question one should answer while implementing an ergonomic program is there enough space for knees and legs below the work surface? Risk Factor involved when there is no enough space is Contact Stress, Bumping into the side of the desktop or objects beneath that can cause bruising and impact trauma to knees or thighs. The risk of Static Loading may arise due to Lack of space below the desktop does not enable changes in posture. To allow enough space below the work surface, materials beneath table should be taken away and raise desktop surface if taller individual has issues bumping into desktop edges, or lower chair. Install keyboard receptacle to extend the distance between the monitor and desktop and provide a lot of leg space. One should also determine whether the reach to overhead storage spaces is decreased. Long, reaches to things kept overhead may end up in overstretching of the muscles and increased strain. Place often-used things on the table surface instead of overhead. Stand and use each hand to raise things from storage. Lower adjustable height storage units as far as attainable while not meddling with monitor placement or any other work. Ideas for effective ergonomic control can be obtained from different sources; for instance workers, OSHA agencies, trade associations, insurance companies, private consultants and networking with other safety professionals who are known to have handled the same kind of problems. Process of implementation will normally involve trials of the selected solution; make modifications from the trials made implement and their performance. During implementation, the following issues should be observed Worksite analysis: secured and health review that identifies jobs and workstations that will contain system hazards, the danger factors that create the hazards, and the causes of the risk factors. Hazard hindrance and control: minimizing the hazards within the worksite analysis by changing the job design, workstations, tools or atmosphere to suit the employee. Medical management analysis: the effective use of accessible health-care resources to stop or manage work-related contractor disorders. Education and training: this is a technique to grant each employees and managers an understanding of the potential risk of injuries, their causes, symptoms, hindrance and treatment. At the start, pat of your part of the ergonomics program are going to be sorting out ways in which to correct issues that have already caused injuries and diseases. As the staffs become aware of ergonomics problems, claims for work-related musculoskeletal disorders might increase for a brief time. Once you are able to focus a lot of effort on prevention, fewer and fewer severe injuries most likely can occur. Like any other safety and health program, your target ought to be to stop as several injuries as attainable (Shaliza A. et al, 2009). The first part of the analysis program ought to be worksite analysis, which may gain thought of as a safety and health review that addresses work-related musculoskeletal disorders. Worksite analysis could be a structured method for distinctive jobs and workstations, which will contain system hazards, the danger factors that cause the hazards, and the causes of the risk factors. Worksite analysis sets the stage for the remainder of the program. Worksite analysis begins with reviewing company records to spot patterns of injuries (or potential injuries) to assist in discovering the roles and workstations, which will have musculoskeletal hazards. Records review Worksite analysis begins with reviewing company records to spot patterns of injuries (or potential injuries) to assist in discovering the roles and workstations that will have system hazards. Records reviews need to be conducted a minimum of once a year to assess progress and to examine if new problem areas have developed Records review need to be conducted before and when these forms of geographic point changes are under creation. This offers a much better plan of whether or not the changes have created new issues. Periodic reviews can assist you keep your program targeted and provides ways in which evaluate success. The records obtainable for review can rely on the record-keeping necessities and desires of the company. (Smaller firms usually have fewer record-keeping necessities but ought to notice that a number of these records are obtainable to them.) It is of importance to have a memory that several of those records might contain confidential. It is necessary that the implementation team maintains confidentiality since the employee’s information like names and alternative distinctive data from bound records to accommodate the law needs to be used. Identifying risk factors Once the records review is completed, one needs to have a brief list of jobs that require analysis. The first step in distinguishing risk factors is to check the roles that have been chosen. The study of the roles ought to be a team effort and may embrace input from the employee as observers from the ergonomics team. A team effort can facilitate to verify risk factors and make sure that they are attainable. The subsequent list of common risk issue will function as a general guide in this method. It is extremely essential that team members are well trained on the use of the worksite analysis tools before worksite analysis begins. Many tools may assist to spot risk factors. A number of them usually used include: 1. Employee interview questionnaire: this will help in getting employee's opinion regarding the chance factors gift within the job. Either a private interview or a written form is used. Anonymous written questionnaires are less threatening, particularly once your program is starting. 2. Checklist: an inventory of risk factors usually found during a specific job. It provides a fast technique to spot the foremost obvious risk factors. 3. Photographing: pictures permit someone to possess a still image that can be reviewed to access the jobs that are thought to have awkward postures (Van Do 2005) 4. Videotaping: A team member videotapes the traditional work from remarkably different angles for an amount of time. (Typically 10-20 minutes or through a minimum of three complete work cycles) and may then read the tape later. This technique permits for motion-picture show viewing and provides observers the chance to check specific sections repeatedly if necessary. (Washington Department of Labour and Industries will offer a lot of information regarding victimisation (videotape with success.) a) Narrative review: A team member watches the work for an amount of time (typically 30- 40 minutes or through 5 or ten complete work cycles) and writes a close description of his/ her observations. b) Symptoms Survey: A symptoms survey will assist in seeking out drawback areas before workers’ compensation claims are filed. c) Workers’ Compensation “Loss Run”, this information is requested from L&I, or if you are self-insured, they are retrieved from your internal knowledge regarding injuries and claims. Hazard hindrance and management Hazard hindrance and management are that part of your ergonomics program in which changes are created so that jobs, workstations, tools and atmosphere match the employee. It is the active method of eliminating or reducing the danger of injury by changing the items that contribute to the danger factors. After measuring the duty and determining the particular issues, it is possible to eliminate or minimize the danger of injury through the implementation of those controls. Personal characteristics of the employees, like size, shape or case history, may have to be accommodated to form the simplest match. Working strategies Work strategies ought to be designed thus work may be completed safely and well and therefore, reducing factors that contribute to work-related contractile organ disorders are reduced. Awkward postures Prolonged awkward postures will increasingly cause fatigue. Work ought to be done thus neutral postures are maintained, stoops and reaches are avoided, and time operating overhead is reduced. For instance, tasks need to be organized in order that staff at a transporter does not have to lean over the belt. Conclusion In summary, the implementation of ergonomics program in the workplace in small firms requires proper monitoring by the management team. Many small firms have achieved greater success by the application of ergonomics programs, the programs reduce the costs involved in MSDs. Employees’ morale and productivity are increased if an effective ergonomic program is implemented. According to research, the cost of MSDs is significantly reduced by implementation and monitoring of an ergonomic program. OSHA proclaims that basic ergonomic program implementation, require flexible and performance based program. The program should reduce MSDs and control the hazards caused by the same. Based on reviews done on ergonomic programs, challenges encountered in the implementation process such as worker involvement, management commitment and sustainability of the program are some of the key aspects that require consideration. The effectiveness of a training regime is determined by the success and the results it brings to the firm in terms of cost reduction. Old programs that have become obsolete require change and improvement of new programs are the crucial factors in the implementation of an ergonomic program. The employees are required to have a complete grasp of the training program and mostly the type of training depends on the kind of the job the employee has. Teachings on risk factors inherent in normal work by the employees and ways of avoiding are factors considered during the program. Many small firms find difficulty in the implementation of ergonomic programs due to rigidity of the employees. Some of the techniques in risk reduction process include job rotation, job hazards analysis, appropriate selection of tools used and implementation of an ergonomic program. For an ergonomic program to achieve full completion and success involvement of various parties in the firm is the vital component. References Andrew D. & Kin,P. (2006) Small Business Ergonomic Case Studies Hazards, Assessments, Solutions, Costs and Benefits: MFL Occupational Health Centre Inc Van, Do. (2005) Benefits of Ergonomics and Implementation of Ergonomics Programs in the Office Workstations: Term Paper - Prepared By: Stephen G., M.A, CIT, and CET, CSHM (2011): OHSHAcademy courses 722 guide Ergonomics program management: Geigle communications, LLC. Portland Fitting the Job to the Worker (2005): An ergonomics program Guideline State of Washington. Department of Labour and Industries: Department of Labour and Industries WISHA Services Division. Shaliza A, Shahrul K, Zalinda O. ((2009): Ergonomics Awareness and Identifying Frequently Used Ergonomics Programs in Manufacturing Industries Using Quality Function Deployment: American Journal of Scientific Research pp.51-66 Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Implementation of Ergonomics for Small Business Term Paper, n.d.)
Implementation of Ergonomics for Small Business Term Paper. Retrieved from https://studentshare.org/business/1789979-implementation-of-an-ergonomics-program-for-a-small-business
(Implementation of Ergonomics for Small Business Term Paper)
Implementation of Ergonomics for Small Business Term Paper. https://studentshare.org/business/1789979-implementation-of-an-ergonomics-program-for-a-small-business.
“Implementation of Ergonomics for Small Business Term Paper”, n.d. https://studentshare.org/business/1789979-implementation-of-an-ergonomics-program-for-a-small-business.
  • Cited: 0 times

CHECK THESE SAMPLES OF Implementation of Ergonomics for Small Business

The effects of ergonomics, health and safety on productivity in hotels

Excess work can be reduced by paying attention ergonomics and health and safety.... CHAPTER 1 Productivity: Productivity is highly significant for nations, industries and organisations because the output of organisations and industries as a whole helps to improve national economy and improve the standard of living in general....
5 Pages (1250 words) Dissertation

Small Business Enterprise

Moreover, the managers have experience in the industry, while a lack of experience is one of the top reasons for small business failure (Holmes, S.... The paper "small business Enterprise" discusses that short term and long term business planning should consider not only the direct decisions necessary such as geographic location, financing and staffing, but also the degree of autonomy of each business unit.... hellip; Problems with finding highly skilled personnel for the business are common when a business is expanding....
7 Pages (1750 words) Case Study

Reducing Stress and Increasing Effectiveness: Proposal of a Banking Environment

This essay, Proposal of a Banking Environment, stresses that the evolution of the world has been accompanied by new, varied concepts.... Needless to say, such variations have been felt in the way buildings are designed.... As such, building designs have been persistently evolving.... nbsp;… As the paper declares building designs concepts and building designs are arguably inseparable....
49 Pages (12250 words) Essay

Strategic management of small firms

Most of the literature that exists in… ategic management in small firms pertains to business planning approach within such companies rather than on the study of management processes and the development of strategic management within smaller entities (Mazzarol, 2004). ... his paper is devoted towards the development of Such firms include entrepreneurial ventures and also business trading entities.... In contrast the literature developed in the context of small firms' strategic management is rather limited....
12 Pages (3000 words) Research Proposal

Information Management: Hopkins Business New technology Infrastructure Implementation

This paper presents a detailed analysis of the implementation of the systems approach to information systems change.... The basic intention is to assess and evaluate the systems based diagnosis of the Hopkins business, in case of new technology infrastructure implementation at business.... In case of new technology development and enhancements there, huge developments in all business are expected.... In case traditional business practices of Hopkins Consultants there are lots of areas that require some enhancements....
10 Pages (2500 words) Coursework

Ergonomics in the Office and Workplace

The paper "Ergonomics in the Office and Workplace" is a critique of ergonomics in the office and workplace: it presents the definition of the term, short history of the concept, highlights OSHA's prolonged comprehensive approach to ergonomics and several principles associated with ergonomics.... The history of ergonomics dates back to the invention of tools.... The Second World War facilitated the development of ergonomics through the reconsideration of the fighter planes whose cockpits had to be adjusted to improve efficiency and worker safety....
8 Pages (2000 words) Term Paper

Ergonomics in the Health Aspects of Working Environment

The author of this research paper "Ergonomics in the Health Aspects of Working Environment" explores the aspect of ergonomics in the health and safety aspects of the working environment, since it deals directly with the correct physical and mental buildup during work performance.... Although my senior managers were quite familiar with the ergonomic impact of efficiency and output, due to time constraints, they could not fully enforce a system of ergonomic valuation in the enterprise, although the workforce was well trained and made competent to understand the importance of ergonomics to reduce work fatigue, stress and make working a more pleasant and pleasurable exercise....
7 Pages (1750 words) Research Paper

Strategies For Successful Kiosk Implementation

The most interesting idea regarding the implementation of kiosks in a shopping mall is its rental facility.... To keep pace along with the changing requirements business entrepreneurs need to identify the latest technology that can bring down the operating cost of business.... business entrepreneurs need to identify the latest technology that can bring down the operating cost of their business and kiosk is one of such innovative solutions....
20 Pages (5000 words) Research Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us